Westwood, CA · 24/7 emergency response
Lead Abatement in Westwood, CA
Homes built before 1978 can have lead paint under newer coats. Before sanding, remodeling or repairs in Westwood, NTOE identifies lead hazards, contains the work area and removes or encapsulates them, for properties from the Village to the condos along the Wilshire corridor.
What lead abatement includes
Lead work is about controlling dust. Every step is planned so lead is dealt with without spreading it to the rest of the property.
Testing and inspection
Lead-based paint is identified and the hazardous surfaces are mapped before any work begins.
Containment
Work areas are sealed off and protected so dust and debris stay where the work is happening.
Removal or encapsulation
Depending on the surface and its condition, lead paint is removed, enclosed or sealed so it is no longer a hazard.
Careful cleanup
Work areas are cleaned thoroughly, and lead waste is handled and disposed of according to the rules for lead materials.
Clearance before reopening
Before the area is used again, it is checked to confirm lead dust has been cleaned up.
Repairs and remodeling
Once the hazard is dealt with, our construction crew repairs and refinishes the area, or carries on with your remodel.
How it works
1. Call us
Call (888) 367-1371 before any sanding, scraping or demolition starts, and tell us about the property and its age.
2. Test and plan
Lead hazards are identified and you get a clear scope of what needs to be done and how the area will be protected.
3. Contain and remove
We seal off the work area, remove or seal the lead hazard, and clean up carefully before the area is reopened.
4. Repair and walk through
Our construction team rebuilds what was lost, then walks the finished work with you before we call it done.
Lead paint in Westwood? Call NTOE now.
We answer 24/7 for Westwood homes and buildings. The sooner we start, the more of your property we can save.
